Analog Cyclic timer
Analog Cyclic timer is used to switch ON & OFF the electrical devices at particular equal or unequal time duration. There are two Rotary switches is provided to set ON & OFF time and it is adjustable from approximately 1 minutes to 5 hours. Widely used..
Digital Automatic Water Level Controller With Low/High Voltage Protection and Timer
This water level controller is switching ON/OFF the motor pumps based on the cyclic ON/OFF set time along with water overflow & sump level sen..
Digital Real Time Water Level Controller
It has 16 programmable switch ON time for the motor pump per day. The motor is switched ON in the set time and it will automatically switch OFF when the tank is full (also when sump is empty in case of sump users)...
Multi-Cycle Timer for Water Pump Controller
It is a programmable timer where desired multiple cyclic patterns can be achieved. This timer has 10 programmable slots (time ranges). Each slot can be programmed from 0:01 – 9:59 (Hours:Minutes). It has ..
Real Time Water Level Controller
This controller is a real time based timer used for switching the motor pumps for the set time along with water overflow preventor. It has 25 ON & OFF programmable time slots where the motor pump can be ..
A timer is an automatic mechanism for activating a device at a preset time. Stop Timer Controller has MANUAL ON and AUTO OFF function for the set time. It requires an operator to set time and to start the timer manually. Further the controller keeps the motor pump ..
Digital Fully Automatic Water Level Controller With Low/High Voltage, Over Load, Dry Run protection with Timer - Tank & Sump
These controllers do not need operator for performing start and stop operations. Fully automatic water level controller switches ON the motor when the water level in th..
Digital Fully Automatic Water Level Controller With Low/High Voltage, Over Load, Dry Run protection with Timer - Tank Only
These controllers do not need operator for performing start and stop operations. Fully automatic water level controller switches ON the motor when the water level in the tank..