Multi-Cycle / Sequential Timer

          It is a programmable timer where desired multiple cyclic patterns can be achieved. This timer has 10 programmable slots (time ranges). Each slot can be programmed from 0:01 – 9:59 (Hours:Minutes). It has the following modes of operation:

1. ON mode: This is achieved when the first slot alone is programmed for the desired hours and minutes to switch ON the device. The remaining 9 slots will not be programmed and is kept zero.

          Result of this operation: The device connected to this pattern will be ON for the programmed Hours:Minutes and then gets switched off. The device must be put ON as and when needed for this pattern of function.

2. OFF mode: This is achieved when the first slot alone is programmed for the desired hours and and minutes to keep the device in OFF condition and then continued ON. The remaining 9 slots will not be programmed and is kept zero.

          Result of this operation: The device connected to this pattern will be OFF for the programmed Hours:Minutes and then gets switched ON continuously. The device must be put ON as and when needed for this pattern of function.

3. CYCLIC mode: Here 2 or more than 2 slots are programmed for the desired Hours:Minutes. The programmed slots will run in its step by step cyclic pattern in a sequential manner.

​

           Result of this operation: The device connected to this pattern will be ON for the programmed Hours:Minutes and then gets switched OFF for the programmed Hours:Minutes. Desired time is fixed in each slot. (No. of slots can be 2 or more as per requirement.) The device can be ON continuously for this pattern of function. 

Product Description:

• Power ON/OFF switch: This switch is provided at the right lower corner to switch ON or switch OFF the controller unit.
• Power ON LED: It indicates the power supply to the unit.
• Load ON LED: It indicates the device ON condition.
• Display time from 0:01 (Hours:Minutes) to 9:59 (Hours:Minutes)
• 3 push button switches provided for programming the timer module.
• Modes: Has 3 modes of operation – ON mode, OFF mode and Cyclic mode.
• Time ranges: 0:01 to 9:59 in single slot.

Salient Features:

• Micro controller based most reliable timer.
• Visual 7 segment LED display to show the time.
• 10 programmable time slots available. 
• Each time slot can be set from 0:01 (Hours:Minutes) to 9:59 (Hours:Minutes). 
• Maximum time that can be achieved would be 99:59 (Hours:Minutes) which is almost 4 days.
• Quick view option for viewing the stored settings
• Retains memory even after power failure, so no need to program again.
• Input & Output Relay Contacts Connected to Industrial trade terminal block for easy connection. 
• Better repeat accuracy
• Long Life
• Easy to install
• Advanced Embedded Technology
• 12 Months Warranty​

Application:

• This Timer can be used only for to control of irrigation systems in the domestic sector, e.g. Lawn sprinkler, and drip house, etc.
• Cyclic control of freezers, coolers, heaters etc
• Delayed stop of Pump / Motor
• Delayed start of equipment after power on etc. Can be used as a ON delay timer
• Can be used for all delayed switching applications in control, starting and protection circuits. They are ideal for use in application like machine tools, material handling, process control and motor control. With multifunction timer, you can configure the same timer as per your application need. Thus one timer is suited for many applications

Downloads