Automatic Water Level Controller with Sump Indication for Motor Pump Upto 1.5 HP

These controllers do not need operator for performing start and stop operations. Automatic water level controller switches ON the motor when the water level in the tank becomes low (desired prefixed lower limit) making sure that water is present in the sump. It switches OFF the motor once the tank becomes full (prefixed higher limit) and also when the sump is empty.

Product Description:

• Power ON LED: It indicates the power supply to the unit.​​
• Motor ON LED: It indicates the motor ON condition.
• Sump Indication: Low level.
• Manual/Auto mode switch:

1. Auto mode: In AUTO mode,  AUTO ON and AUTO OFF operation occurs.
2. Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be constantly running.
3. Semi-Automatic(Manual ON and Auto OFF) fucntion is acheived by changing this switch position from Manual mode to Auto mode.

Salient Features :

• Visual indication - Power ON, Motor ON, Sump Low Indication.
• Long Life
• Easy to install
• Suitable for AC motor up to 1.5 hp (Single phase motor - Monoblock, Jet Pump, Submersible,etc.)
• It supports Magnetic float switch/sensor, Contact type sensor 
• Advanced Embedded Technology
• 12 Months Warranty

Application:

• Automatic water level controller is of much used in metro cities, bungalows, industries, hospitals and in luxurious apartments and homes. Use of this product saves water, saves electricity and saves time.
• Useful in case of under ground tank or ground level tank (sump) to tank set up. 
• Helps in preventing overflow of water from the overhead tank.

Downloads